|
HD Slides
Heavy
Duty Low Maintenance High Capacity Slides
for Harsh Environments
Heavy Duty, low
maintenance, high capacity slides for harsh environments that do not require
precision mounting surfaces. Slides are constructed of hardened and ground
rail, and high strength aluminum saddles with durable heavy load carrying
needle roller bearings.
Slides will perform
equally as well in any orientation and when the saddle or the rail is the
traveling component. Versatile mounting holes are provided on both the
saddles and the rails. Applications requiring high cantilevered loads are
well suited for these high moment capacity slides. HD Slides will
outperform profile or shaft type anti-friction slides in high production
assembly and heavy manufacturing operations where machine up time is a must.
Why HD Slides are Superior:
Bearing contamination causes bearing failures. The HD Slide’s
design inherently separates contaminants that will collect on the rail in
manufacturing environments from the roller’s bearing needles because the
outer race of the sealed needle bearing roller is what engages the rail. On
profile rail and shaft type anti-friction slides, the bearing balls engage
directly with the profile rail and shafting. When contaminants get past the
seals, the bearings are corrupted.
Because HD Slides do not require precision mounting surfaces,
milling of mounting surfaces are not required. The elimination of machining
not only significantly saves money, but provides design flexibility,
particularly on large welded frames.
From a heavy manufacturing environment’s practical
perspective, the mounting holes provided in the profile rail and linear
shaft slides are too small. The smallest size mounting hole you will find in
an HD Slide is for a 5/16” diameter bolt.
When removing the HD Slide saddle from the rail, all
components remain attached. With a profile type slide, if you remove the
saddle, the bearing balls will release from the saddle bearing and are
easily lost. When these balls are not replaced when the saddle is
reassembled to the rail, the bearing life is significantly reduced.
HD Slides components are available in a number of different
materials to meet your equipment requirements. The slide saddles are
available in both steel and high strength aluminum. The rails are available
in hardened and ground steel for high duty cycle applications or cold rolled
steel standard bar stock for low duty cycle and lower budget applications.
Moreover, Stainless Steel HD Slide Assemblies are available when corrosion
resistant machine components are specified.
HD Slides have a Two Year Limited Warranty.
|
Model |
Static Load Capacity |
Dynamic Load Capacity
|
|
FA |
FB |
FA |
FB |
|
LBS |
N |
LBS |
N |
LBS |
N |
LBS |
N |
|
4062 |
3,835 |
17,060 |
7,671 |
34,120 |
2,851 |
12,680 |
5,701 |
25,360 |
|
4075 |
5,530 |
24,600 |
11,061 |
49,200 |
3,916 |
17,420 |
7,832 |
34,840 |
|
4100 |
10,206 |
45,400 |
20,413 |
90,800 |
5,890 |
26,200 |
11,780 |
52,400 |
|
4125 |
14,253 |
63,400 |
28,506 |
126,800 |
10,611 |
47,200 |
21,222 |
94,400 |
|
4150 |
18,030 |
80,200 |
36,060 |
160,400 |
12,679 |
56,400 |
25,359 |
112,800 |
|
4200 |
36,239 |
161,200 |
72,479 |
322,400 |
20,548 |
91,400 |
41,095 |
182,800 |
|
Model |
Static Moment Capacity
|
Dynamic Moment Capacity |
|
MA |
MB |
MC |
MA |
MB |
MC |
|
FT-LBS |
N-M |
FT-LBS |
N-M |
FT-LBS |
N-M |
FT-LBS |
N-M |
FT-LBS |
N-M |
FT-LBS |
N-M |
|
4062 |
893 |
1,211 |
690 |
936 |
1,125 |
1,525 |
664 |
900 |
513 |
696 |
836 |
1,134 |
|
4075 |
1,444 |
1,957 |
1,204 |
1,632 |
1,743 |
2,364 |
1,022 |
1,386 |
852 |
1,156 |
1,235 |
1,674 |
|
4100 |
3,201 |
4,339 |
3,166 |
4,292 |
3,639 |
4,934 |
1,847 |
2,504 |
1,827 |
2,477 |
2,100 |
2,848 |
|
4125 |
5,600 |
7,593 |
5,642 |
7,649 |
6,010 |
8,148 |
4,169 |
5,653 |
4,200 |
5,695 |
4,474 |
6,066 |
|
4150 |
8,126 |
11,018 |
8,433 |
11,434 |
8,340 |
11,308 |
5,715 |
7,748 |
5,931 |
8,041 |
5,865 |
7,952 |
|
4200 |
20,596 |
27,924 |
15,830 |
21,463 |
21,260 |
28,825 |
11,678 |
15,833 |
8,976 |
12,170 |
12,055 |
16,344 |
___________________________________________________________________________
|
DIMENSIONAL DATA (IN) |
|
Model |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
LMIN |
M |
N |
|
4062 |
7.00 |
3.75 |
2.50 |
1.50 |
1.00 |
6.00 |
3.13 |
2.63 |
1.38 |
.75 |
3.00 |
12.00 |
1.19 |
.38 |
|
4075 |
8.00 |
4.50 |
3.00 |
1.75 |
1.25 |
6.00 |
3.50 |
2.81 |
2.00 |
.875 |
3.00 |
12.00 |
1.25 |
.50 |
|
4100 |
9.00 |
5.75 |
4.00 |
2.75 |
1.25 |
6.00 |
3.75 |
3.25 |
3.00 |
1.38 |
3.00 |
12.00 |
1.38 |
.75 |
|
4125 |
11.50 |
7.25 |
5.00 |
3.50 |
2.00 |
8.00 |
5.00 |
4.56 |
3.75 |
1.50 |
3.00 |
14.00 |
1.75 |
.75 |
|
4150 |
13.00 |
8.50 |
6.00 |
3.50 |
2.00 |
10.00 |
5.50 |
4.81 |
4.50 |
2.00 |
5.00 |
20.00 |
2.00 |
1.00 |
|
4200 |
18.00 |
9.50 |
6.00 |
3.50 |
2.00 |
10.00 |
8.00 |
6.63 |
5.00 |
2.00 |
5.00 |
20.00 |
2.25 |
1.00 |
|
Model |
O |
P |
Q |
R |
S |
T |
U |
V |
W |
X |
Y |
|
4062 |
1.38 |
1.00 |
.38 |
.34 |
5/16-18 |
5/16-18 |
2.13 |
3.13 |
4.13 |
2.13 |
.25 |
|
4075 |
1.50 |
1.00 |
.50 |
.34 |
3/8-16 |
3/8-16 |
2.50 |
3.75 |
4.88 |
2.75 |
.31 |
|
4100 |
1.75 |
1.00 |
.50 |
.41 |
7/16-14 |
7/16-14 |
3.00 |
5.00 |
6.38 |
3.00 |
.38 |
|
4125 |
2.50 |
1.50 |
.75 |
.53 |
1/2-13 |
1/2-13 |
3.50 |
6.25 |
8.00 |
4.00 |
.50 |
|
4150 |
2.50 |
1.50 |
.75 |
.53 |
5/8-11 |
5/8-11 |
3.50 |
7.50 |
9.50 |
4.75 |
.50 |
|
4200 |
3.25 |
1.50 |
.75 |
.53 |
3/4-10 |
3/4-10 |
4.00 |
8.00 |
10.50 |
7.00 |
.75 |
NOTE:
·
All tapped holes are ¾” deep
·
Dimensioning tolerance: +/- .020” except mounting hole to hole is +/- .010
·
.001” to .005” and .001” to .012” running clearance between rollers and
rail for hardened and not hardened rail respectively
·
HD Slide rails are available through hardened (Rc 32) and ground,
or not hardened (for low duty cycle applications, approximately 10
cycles/day) where both options are machinable for alternate rail mounting
holes and for mounting of mechanical stops, sensor brackets, etc.
|
SLIDE COMPONENT WEIGHTS |
|
Model |
Alum. Saddle (LBS) |
Steel Saddle (LBS) |
Rail (LBS / IN) |
Stand Off (LBS) |
|
4062 |
2.70 |
8.10 |
.26 |
0.39 |
|
4075 |
4.00 |
12.00 |
.42 |
0.39 |
|
4100 |
6.31 |
18.93 |
.56 |
0.93 |
|
4125 |
13.60 |
40.80 |
1.05 |
2.55 |
|
4150 |
20.75 |
62.25 |
1.30 |
3.00 |
|
4200 |
34.25 |
102.75 |
1.30 |
3.51 |
___________________________________________________________________________
How to Order:
Model
Number Coding
Standard Rail
Lengths = (z) F + 2K
[Standard Rail
Lengths up to 9 Feet Available]
z = # of
Mounting Bolt Hole Standard Spaces (F) to Suit Application
F and K for
each Model is found in the “DIMENSIONAL DATA” Chart on the previous page
[Custom
Lengths Available Upon Request]
___________________________________________________________________________
For a Quotation and to
Order, please
contact Bearings Distributors, Inc.
Visit
www.BDI-USA.com to find your local
sales office or call (216)
642-9100
For Technical
Questions, please
contact R.P. Gatta, Inc. at
HDslides@rpgatta.com or (330)
562-2288
|
|
|
|
|
|
|
|
